The current drawn by the application nRF54LV10A SoC can be monitored on the nRF54LV10 DK.
Current can be measured using any of the following test instruments:
- Power Profiler Kit II (PPK2)
- Oscilloscope
- Ampere meter
- Power analyzer
The following sections provide information on the nRF54LV10 DK measurement setup. If the PPK2 is used for measuring current, see Power Profiler Kit II for more information. Power analyzer measurements are not described in this document.
The nRF54LV10 DK can measure current on VDD:nRF using P6.
Note: The measurement readings might introduce noise if the virtual serial port is open.
For more information on current measurement, see Current measurement guide: Introduction.