|
|
|
struct
|
sd_mbr_command_copy_sd_t
|
|
|
This command copies part of a new SoftDevice The destination area is erased before copying. If dst is in the middle of a flash page, that whole flash page will be erased. If (dst+len) is in the middle of a flash page, that whole flash page will be erased.
More...
|
|
|
|
struct
|
sd_mbr_command_compare_t
|
|
|
This command works like memcmp, but takes the length in words.
More...
|
|
|
|
struct
|
sd_mbr_command_copy_bl_t
|
|
|
This command copies a new BootLoader. With this command, destination of BootLoader is always the address written in NRF_UICR->BOOTADDR.
More...
|
|
|
|
struct
|
sd_mbr_command_vector_table_base_set_t
|
|
|
Change the address the MBR starts after a reset.
More...
|
|
|
|
struct
|
sd_mbr_command_irq_forward_address_set_t
|
|
|
Sets the base address of the interrupt vector table for interrupts forwarded from the MBR Unlike
sd_mbr_command_vector_table_base_set_t
, this function does not reset, and it does not change where the MBR starts after reset.
More...
|
|
|
|
struct
|
sd_mbr_command_t
|
|
|