The nRF7002 EK has three solder bridges, one for each power net. You must cut the corresponding solder bridge when measuring current.
The following section includes a solder bridge overview table and an image of the solder bridges on the back of the nRF7002 EK.
| Solder bridge | Default | Function |
|---|---|---|
| SB1 | Closed | Cut to disconnect VBAT |
| SB2 | Closed | Cut to disconnect IOVDD |
| SB3 | Closed | Cut to disconnect OTPVDD |
Figure 1. nRF7002 EK solder bridges
