The bypass capacitors on the Low-Dropout Regulator (LDO) outputs are available when the load switches are in LDO mode.
For LDO mode, connect jumpers between pin 3 and 4 on pin header P16 for LDO1 and pin 1 and 2 for LDO2. The LDO schematic is shown in Load switch and LDO schematic.
| PMIC pin | Connected configuration | Connected jumper pins |
|---|---|---|
| VOUTLDO1 | LDO1 | P16 pin 3 to pin 4 |
| VOUTLDO2 | LDO2 | P16 pin 1 to pin 2 |
Note: Ensure the LDO bypass capacitors are disconnected when the load
switches are not in LDO mode.