Address offset: 0x000
System reset request and status
Only the enumerated values are supported, writing other values has unpredictable effect.
The Erase all operation cannot be interrupted by this reset request. Once the Erase all operation has started, CTRL-AP reset requests are ignored.
| Bit number | 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ID | A | A | A | ||||||||||||||||||||||||||||||||
| Reset 0x00000000 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | |||
| ID | R/W | Field | Value ID | Value | Description | ||||||||||||||||||||||||||||||
| A |
W |
RESET |
Reset request |
||||||||||||||||||||||||||||||||
|
NoReset |
0 |
Release the RESET register value. |
|||||||||||||||||||||||||||||||||
|
SoftReset |
1 |
Trigger soft reset of the device. Use NoReset after the device has been reset. |
|||||||||||||||||||||||||||||||||
|
HardReset |
2 |
Trigger hard reset of the device. Use NoReset after the device has been reset. Use as part of the ERASEALL sequence. |
|||||||||||||||||||||||||||||||||
|
PinReset |
4 |
Trigger pin reset of the device. Use NoReset after the device has been reset. |
|||||||||||||||||||||||||||||||||