ZDO miscellaneous management services

Get device type of neighbor table record.

Parameters

var	- neighbor table record type_flags

zb_zdo_neighbor_table_record_s

Get relationship of neighbor table record.

Parameters

var	- neighbor table record type_flags

zb_zdo_neighbor_table_record_s

Get RxOnWhenIdle of neighbor table record.

Parameters

var	- neighbor table record type_flags

zb_zdo_neighbor_table_record_s

Set device type of neighbor table record to type 'type': bits 0 - 1, mask 0x3;

Parameters

var	- neighbor table record type_flags
type	- Zigbee device type value

zb_zdo_neighbor_table_record_s

Set relationship attribute of neighbor table record to type 'type': bits 4 - 6, mask 0x70;

Parameters

var	- neighbor table record type_flags
type	- Zigbee relationship value

zb_zdo_neighbor_table_record_s

Set RxOnWhenIdle attribute of neighbor table record to type 'type': bits 2 - 3, mask 0xC;

Parameters

var	- neighbor table record type_flags
type	- RxOnWhenIdle value

zb_zdo_neighbor_table_record_s

Arguments of the NLME-LEAVE.indication routine.

Parameters of Device_annce primitive.

To be put into buffer as data (means - after space alloc).

Request for Mgmt_Leave_req.

See also

ZB spec, subclause 2.4.3.3.5.

Problem in the specification: in 2.4.3.3.5 Mgmt_Leave_req only one DeviceAddress exists. But, in such case it is impossible to satisfy 2.4.3.3.5.1: "The Mgmt_Leave_req is generated from a Local Device requesting that a Remote Device leave the network or to request that another device leave the network." Also, in the PRO TC document, 14.2TP/NWK/BV-04 ZR-ZDO-APL RX Join/Leave is following note: "gZC sends Mgmt_Leave.request with DevAddr=all zero, DstAddr=ZR"

Request for Mgmt_Leave_req.

See also

ZB spec, subclause 2.4.3.3.5.

Response for Mgmt_Leave_rsp.

See also

ZB spec, subclause 2.4.4.3.5.

Parameters for Mgmt_Lqi_req.

See also

ZB spec, subclause 2.4.3.3.2.

Request for Mgmt_Lqi_req.

See also

ZB spec, subclause 2.4.3.3.2.

Response for Mgmt_Lqi_rsp.

See also

ZB spec, subclause 2.4.4.3.2.

Parameters for Mgmt_Permit_Joining_req.

See also

ZB spec, subclause 2.4.3.3.7.

Arguments of asynchronous Get Long Poll Interval response.

Sends Mgmt_Lqi_req (see Zigbee spec 2.4.3.3.2)

Parameters

param	- index of buffer with Lqi request parameters. zb_zdo_mgmt_lqi_param_s
cb	- user's function to call when got response from the remote.

Returns

- ZDP transaction sequence number or 0xFF if operation cannot be performed now (nor enough memory, resources, etc.) zb_zdo_mgmt_lqi_resp_s, zb_zdo_neighbor_table_record_s

Example:

{
  zb_uint8_t tsn;
  zb_zdo_mgmt_lqi_param_t *req_param;
  req_param = ZB_BUF_GET_PARAM(buf, zb_zdo_mgmt_lqi_param_t);
  req_param->start_index = 0;
  req_param->dst_addr = 0; //coord short addr
  tsn = zb_zdo_mgmt_lqi_req(ZB_REF_FROM_BUF(buf), get_lqi_cb);
}
void get_lqi_cb(zb_uint8_t param)
{
  zb_bufid_t buf = param;
  zb_uint8_t *zdp_cmd = zb_buf_begin(buf);
  zb_zdo_mgmt_lqi_resp_t *resp = (zb_zdo_mgmt_lqi_resp_t*)(zdp_cmd);
  zb_zdo_neighbor_table_record_t *record = (zb_zdo_neighbor_table_record_t*)(resp + 1);
  zb_uint_t i;
  TRACE_MSG(TRACE_APS1, "get_lqi_cb status %hd, neighbor_table_entries %hd, start_index %hd, neighbor_table_list_count %d",
            (FMT__H_H_H_H, resp->status, resp->neighbor_table_entries, resp->start_index, resp->neighbor_table_list_count));
  for (i = 0; i < resp->neighbor_table_list_count; i++)
  {
    TRACE_MSG(TRACE_APS1, "#%hd: long addr " TRACE_FORMAT_64 " pan id " TRACE_FORMAT_64,
              (FMT__H_A_A, i, TRACE_ARG_64(record->ext_addr), TRACE_ARG_64(record->ext_pan_id)));
    TRACE_MSG(TRACE_APS1,
      "#%hd: network_addr %d, dev_type %hd, rx_on_wen_idle %hd, relationship %hd, permit_join %hd, depth %hd, lqi %hd",
      (FMT_H_D_H_H_H_H_H_H, i, record->network_addr,
       ZB_ZDO_RECORD_GET_DEVICE_TYPE(record->type_flags),
       ZB_ZDO_RECORD_GET_RX_ON_WHEN_IDLE(record->type_flags),
       ZB_ZDO_RECORD_GET_RELATIONSHIP(record->type_flags),
       record->permit_join, record->depth, record->lqi));
    record++;
  }
}

Performs Mgmt_NWK_Update_req request.

Parameters

param	- index of buffer with call parameters. Parameters must be put into buffer as parameters. zb_zdo_mgmt_nwk_update_req_s
cb	- user's function to call when got response from the remote. zb_zdo_mgmt_nwk_update_notify_hdr_s

Returns

- ZDP transaction sequence number or 0xFF if operation cannot be performed now (nor enough memory, resources, etc.)

Example:

{
  zb_uint8_t tsn;
  zb_zdo_mgmt_nwk_update_req_t *req;
  req = ZB_BUF_GET_PARAM(buf, zb_zdo_mgmt_nwk_update_req_t);
  req->hdr.scan_channels = ZB_MAC_ALL_CHANNELS_MASK;
  req->hdr.scan_duration = TEST_SCAN_DURATION;
  req->scan_count = TEST_SCAN_COUNT;
  req->dst_addr = 0;
  tsn = zb_zdo_mgmt_nwk_update_req(param, mgmt_nwk_update_ok_cb);
}
void mgmt_nwk_update_ok_cb(zb_uint8_t param)
{
  zb_bufid_t buf = param;
  zb_uint8_t *zdp_cmd = zb_buf_begin(buf);
  zb_zdo_mgmt_nwk_update_notify_hdr_t *notify_resp = (zb_zdo_mgmt_nwk_update_notify_hdr_t *)zdp_cmd;
  TRACE_MSG(TRACE_APS3,
            "notify_resp status %hd, scanned_channels %x %x, total_transmissions %hd, "
            "transmission_failures %hd, scanned_channels_list_count %hd, buf len %hd",
            (FMT__H_D_D_H_H_H_H, notify_resp->status, (zb_uint16_t)notify_resp->scanned_channels,
             *((zb_uint16_t*)&notify_resp->scanned_channels + 1),
             notify_resp->total_transmissions, notify_resp->transmission_failures,
             notify_resp->scanned_channels_list_count, zb_buf_len(buf)));
  if (notify_resp->status == ZB_ZDP_STATUS_SUCCESS)
  {
    TRACE_MSG(TRACE_APS3, "mgmt_nwk_update_notify received, Ok", (FMT__0));
  }
  else
  {
    TRACE_MSG(TRACE_ERROR, "mgmt_nwk_update_notify received, ERROR incorrect status %x",
              (FMT__D, notify_resp->status));
  }
  zb_buf_free(buf);
}

sends Mgmt_Permit_Joining_req (See Zigbee spec 2.4.3.3.7)

Parameters

param	- Index of buffer with request
cb	- user's function to call when got response from the remote.

Returns

ZDP transaction sequence number

0xFF if operation cannot be performed now (nor enough memory, resources, etc.)

        /* Example: send permit join request to close network */
        req_param = ZB_BUF_GET_PARAM(buf, zb_zdo_mgmt_permit_joining_req_param_t);
        req_param->dest_addr = 0xfffc;
        req_param->permit_duration = 0;
        req_param->tc_significance = 1;
        zb_zdo_mgmt_permit_joining_req(buf, permit_joining_cb);

Sends Mgmt_Leave_req.

See also

ZB spec, subclause 2.4.3.3.2.

Parameters

param	- index of buffer with Lqi request parameters. zb_zdo_mgmt_leave_param_s
cb	- user's function to call when got response from the remote.

Returns

- transaction sequence number of request or 0xFF if operation can't be performed right now (if there is no free slot for registering the callback)

Example:

{
  zb_bufid_t buf = param;
  zb_zdo_mgmt_leave_param_t *req = NULL;
  zb_ret_t ret = RET_OK;
  zb_uint8_t tsn;
  TRACE_MSG(TRACE_ERROR, "zb_leave_req", (FMT__0));
  req = ZB_BUF_GET_PARAM(buf, zb_zdo_mgmt_leave_param_t);
  ZB_MEMSET(req->device_address, 0, sizeof(zb_ieee_addr_t));
  req->remove_children = ZB_FALSE;
  req->rejoin = ZB_FALSE;
  req->dst_addr = 1;
  tsn = zdo_mgmt_leave_req(param, leave_callback);
}
void leave_callback(zb_uint8_t param)
{
  zb_zdo_mgmt_leave_res_t *resp = (zb_zdo_mgmt_leave_res_t *)zb_buf_begin(param);
  TRACE_MSG(TRACE_ERROR, "LEAVE CALLBACK status %hd", (FMT__H, resp->status));
}