ZDO binding management

16-bit group address for DstAddress and DstEndp not present

64-bit extended address for DstAddress and DstEndp present

Type for bind destination address mode.

Parameters for End_Device_Bind_req.

See also

ZB spec, subclause 2.4.3.2.1.

Bind_req request head send to the remote.

See also

ZB spec, subclause 2.4.3.2.2.

Parameters for Bind_req API call.

See also

ZB spec, subclause 2.4.3.2.2.

Bind_req request tail 1st variant send to the remote.

See also

ZB spec, subclause 2.4.3.2.2.

Bind_req request tail 2nd variant send to the remote.

See also

ZB spec, subclause 2.4.3.2.2.

End_Device_Bind_req command head.

See also

ZB spec, subclause 2.4.3.2.1.

End_Device_Bind_req command head.

See also

ZB spec, subclause 2.4.3.2.1.

Response from End_Device_Bind_req.

See also

ZB spec, subclause 2.4.3.2.1.

Parameters for Mgmt_Bind_req.

See also

ZB spec, subclause 2.4.3.3.4.

Request for Mgmt_Bind_req.

See also

ZB spec, subclause 2.4.3.3.4.

Response for Mgmt_Bind_rsp.

See also

ZB spec, subclause 2.4.4.3.4.

sends 2.4.3.2.1 End_Device_Bind_req command

Parameters

param	- index of buffer with request
cb	- user's function to call when got response from the remote.

Returns

ZDP transaction sequence number or

0xFF if operation cannot be performed now (nor enough memory, resources, etc.)

Bind_req request.

Parameters

param	- index of buffer with request. zb_apsme_binding_req_s
cb	- user's function to call when got response from the remote. zb_zdo_bind_resp_s

Returns

ZDP transaction sequence number

0xFF if operation cannot be performed now (nor enough memory, resources, etc.)

Example:

void bind_device(zb_uint8_t param, zb_uint16_t dev_idx)
{
  zb_bufid_t buf = param;
  zb_zdo_bind_req_param_t *req;
  TRACE_MSG(TRACE_APP2, ">> bind_device param %hd", (FMT__H, param));
  if (dev_idx != SIMPLE_GW_INVALID_DEV_INDEX)
  {
    req = ZB_BUF_GET_PARAM(buf, zb_zdo_bind_req_param_t);
    ZB_MEMCPY(&req->src_address, g_device_ctx.devices[dev_idx].ieee_addr, sizeof(zb_ieee_addr_t));
    req->src_endp = g_device_ctx.devices[dev_idx].endpoint;
    req->cluster_id = ZB_ZCL_CLUSTER_ID_ON_OFF;
    req->dst_addr_mode = ZB_APS_ADDR_MODE_64_ENDP_PRESENT;
    zb_get_long_address(req->dst_address.addr_long);
    req->dst_endp = SIMPLE_GW_ENDPOINT;
    req->req_dst_addr = g_device_ctx.devices[dev_idx].short_addr;
    zb_zdo_bind_req(param, bind_device_cb);
  }
  else
  {
    TRACE_MSG(TRACE_APP2, "No devices in binding configuration state were found!", (FMT__0));
    zb_buf_free(buf);
  }
  TRACE_MSG(TRACE_APP2, "<< bind_device", (FMT__0));
}
void bind_device_cb(zb_uint8_t param)
{
  zb_bufid_t buf = param;
  zb_zdo_bind_resp_t *bind_resp = (zb_zdo_bind_resp_t*)zb_buf_begin(buf);
  if (bind_resp->status == ZB_ZDP_STATUS_SUCCESS)
  {
    zb_uint8_t dev_idx = simple_gw_get_dev_index_by_state(CONFIGURE_BINDING);
    if (dev_idx != SIMPLE_GW_INVALID_DEV_INDEX)
    {
      g_device_ctx.devices[dev_idx].dev_state = CONFIGURE_REPORTING;
      ZB_SCHEDULE_APP_CALLBACK2(configure_reporting, param, dev_idx);
      param = 0;
    }
  }
  if (param)
  {
    zb_buf_free(buf);
  }
}

Sends Mgmt_Bind_req request.

Parameters

param	reference to the buffer to put request data to.
cb	callback to be called on operation finish.

Returns

ZDP transaction sequence number

0xFF if operation cannot be performed now (nor enough memory, resources, etc.)

Unbind_req request.

Parameters

param	- index of buffer with request. zb_zdo_bind_req_param_s
cb	- user's function to call when got response from the remote. zb_zdo_bind_resp_s

Returns

ZDP transaction sequence number

0xFF if operation cannot be performed now (nor enough memory, resources, etc.)

Example:

{
  zb_bufid_t buf = param;
  zb_zdo_bind_req_param_t *bind_param;
  TRACE_MSG(TRACE_COMMON1, "unbind_device_1", (FMT__0));
  zb_buf_initial_alloc(buf, 0);
  bind_param = ZB_BUF_GET_PARAM(buf, zb_zdo_bind_req_param_t);
  ZB_MEMCPY(bind_param->src_address, g_ieee_addr_ed1, sizeof(zb_ieee_addr_t));
  bind_param->src_endp = TEST_ED1_EP;
  bind_param->cluster_id = TP_BUFFER_TEST_REQUEST_CLID;
  bind_param->dst_addr_mode = ZB_APS_ADDR_MODE_64_ENDP_PRESENT;
  ZB_MEMCPY(bind_param->dst_address.addr_long, g_ieee_addr_ed2, sizeof(zb_ieee_addr_t));
  bind_param->dst_endp = TEST_ED2_EP;
  bind_param->req_dst_addr = zb_address_short_by_ieee(g_ieee_addr_ed1);
  TRACE_MSG(TRACE_COMMON1, "dst addr %d", (FMT__D, bind_param->req_dst_addr));
  zb_zdo_unbind_req(buf, unbind_device1_cb);
}
void unbind_device1_cb(zb_uint8_t param)
{
  zb_bufid_t buf = ZB_BUF_FROM_REF(param);
  zb_zdo_bind_resp_t *bind_resp = (zb_zdo_bind_resp_t*)zb_buf_begin(buf);
  TRACE_MSG(TRACE_COMMON1, "unbind_device1_cb resp status %hd", (FMT__H, bind_resp->status));
  if (bind_resp->status != ZB_ZDP_STATUS_SUCCESS)
  {
    TRACE_MSG(TRACE_COMMON1, "Error bind device 1. Test status failed", (FMT__0));
  }
  zb_free_buf(buf);
}

Sends 2.4.4.3.4 Mgmt_Bind_rsp.

Parameters

param

- index of buffer with Mgmt_Bind request