Macros |
|
| #define | NRF_ANT_ERROR_OFFSET 0x4000 |
|
ANT Error Return parameter definitions.
|
|
| #define | NRF_ANT_ERROR_CHANNEL_IN_WRONG_STATE NRF_ANT_ERROR_OFFSET + CHANNEL_IN_WRONG_STATE |
|
Response on attempt to perform an action from the wrong channel state.
|
|
| #define | NRF_ANT_ERROR_CHANNEL_NOT_OPENED NRF_ANT_ERROR_OFFSET + CHANNEL_NOT_OPENED |
|
Response on attempt to communicate on a channel that is not open.
|
|
| #define | NRF_ANT_ERROR_CHANNEL_ID_NOT_SET NRF_ANT_ERROR_OFFSET + CHANNEL_ID_NOT_SET |
|
Response on attempt to open a channel without setting the channel ID.
|
|
| #define | NRF_ANT_ERROR_CLOSE_ALL_CHANNELS NRF_ANT_ERROR_OFFSET + CLOSE_ALL_CHANNELS |
|
Response when attempting to start scanning mode, when channels are still open.
|
|
| #define | NRF_ANT_ERROR_TRANSFER_IN_PROGRESS NRF_ANT_ERROR_OFFSET + TRANSFER_IN_PROGRESS |
|
Response on attempt to communicate on a channel with a TX transfer in progress.
|
|
| #define | NRF_ANT_ERROR_TRANSFER_SEQUENCE_NUMBER_ERROR NRF_ANT_ERROR_OFFSET + TRANSFER_SEQUENCE_NUMBER_ERROR |
|
Response when sequence number of burst message or burst data segment is out of order.
|
|
| #define | NRF_ANT_ERROR_TRANSFER_IN_ERROR NRF_ANT_ERROR_OFFSET + TRANSFER_IN_ERROR |
|
Response when transfer error has occured on supplied burst message or burst data segment.
|
|
| #define | NRF_ANT_ERROR_TRANSFER_BUSY NRF_ANT_ERROR_OFFSET + TRANSFER_BUSY |
|
Response when transfer is busy and cannot process supplied burst message or burst data segment.
|
|
| #define | NRF_ANT_ERROR_MESSAGE_SIZE_EXCEEDS_LIMIT NRF_ANT_ERROR_OFFSET + MESSAGE_SIZE_EXCEEDS_LIMIT |
|
Response if a data message is provided that is too large.
|
|
| #define | NRF_ANT_ERROR_INVALID_MESSAGE NRF_ANT_ERROR_OFFSET + INVALID_MESSAGE |
|
Response when the message has an invalid parameter.
|
|
| #define | NRF_ANT_ERROR_INVALID_NETWORK_NUMBER NRF_ANT_ERROR_OFFSET + INVALID_NETWORK_NUMBER |
|
Response when an invalid network number is provided.
|
|
| #define | NRF_ANT_ERROR_INVALID_LIST_ID NRF_ANT_ERROR_OFFSET + INVALID_LIST_ID |
|
Response when the provided list ID or size exceeds the limit.
|
|
| #define | NRF_ANT_ERROR_INVALID_SCAN_TX_CHANNEL NRF_ANT_ERROR_OFFSET + INVALID_SCAN_TX_CHANNEL |
|
Response when attempting to transmit on channel 0 when in scan mode.
|
|
| #define | NRF_ANT_ERROR_INVALID_PARAMETER_PROVIDED NRF_ANT_ERROR_OFFSET + INVALID_PARAMETER_PROVIDED |
|
Response when an invalid parameter is specified in a configuration message.
|
|
Detailed Description
Copyright 2016 by Garmin Ltd. or its subsidiaries. All rights reserved.
Use of this Software is limited and subject to the ANT SoftDevice License Agreement. The Agreement accompanies the Software in the root directory of the .zip file containing this Software.