sd_mbr_command_vector_table_base_set_t

Sets the base address of the interrupt vector table for interrupts forwarded from the MBR.

Once this function has been called, this address is where the MBR will start to forward interrupts to after a reset.

To restore default forwarding this function should be called with

Parameters

address

set to 0. The MBR will then start forwarding to interrupts to the adress in NFR_UICR->BOOTADDR or to the SoftDevice if the BOOTADDR is not set.

Return values

NRF_SUCCESS
NRF_ERROR_INTERNAL	indicates an internal error that should not happen.
NRF_ERROR_INVALID_ADDR	if parameter address is outside of the flash size.