S210 SoftDevice v5.0.0
Macros |
|
| #define | NRF_ANT_ERROR_OFFSET 0x4000 |
|
ANT Error Return parameter definitions.
|
|
| #define | NRF_ANT_ERROR_CHANNEL_IN_WRONG_STATE NRF_ANT_ERROR_OFFSET + CHANNEL_IN_WRONG_STATE |
|
Response on attempt to perform an action from the wrong channel state.
|
|
| #define | NRF_ANT_ERROR_CHANNEL_NOT_OPENED NRF_ANT_ERROR_OFFSET + CHANNEL_NOT_OPENED |
|
Response on attempt to communicate on a channel that is not open.
|
|
| #define | NRF_ANT_ERROR_CHANNEL_ID_NOT_SET NRF_ANT_ERROR_OFFSET + CHANNEL_ID_NOT_SET |
|
Response on attempt to open a channel without setting the channel ID.
|
|
| #define | NRF_ANT_ERROR_CLOSE_ALL_CHANNELS NRF_ANT_ERROR_OFFSET + CLOSE_ALL_CHANNELS |
|
Response when attempting to start scanning mode, when channels are still open.
|
|
| #define | NRF_ANT_ERROR_TRANSFER_IN_PROGRESS NRF_ANT_ERROR_OFFSET + TRANSFER_IN_PROGRESS |
|
Response on attempt to communicate on a channel with a TX transfer in progress.
|
|
| #define | NRF_ANT_ERROR_TRANSFER_SEQUENCE_NUMBER_ERROR NRF_ANT_ERROR_OFFSET + TRANSFER_SEQUENCE_NUMBER_ERROR |
|
Response when sequence number of burst message or burst data segment is out of order.
|
|
| #define | NRF_ANT_ERROR_TRANSFER_IN_ERROR NRF_ANT_ERROR_OFFSET + TRANSFER_IN_ERROR |
|
Response when transfer error has occured on supplied burst message or burst data segment.
|
|
| #define | NRF_ANT_ERROR_TRANSFER_BUSY NRF_ANT_ERROR_OFFSET + TRANSFER_BUSY |
|
Response when transfer is busy and cannot process supplied burst message or burst data segment.
|
|
| #define | NRF_ANT_ERROR_MESSAGE_SIZE_EXCEEDS_LIMIT NRF_ANT_ERROR_OFFSET + MESSAGE_SIZE_EXCEEDS_LIMIT |
|
Response if a data message is provided that is too large.
|
|
| #define | NRF_ANT_ERROR_INVALID_MESSAGE NRF_ANT_ERROR_OFFSET + INVALID_MESSAGE |
|
Response when the message has an invalid parameter.
|
|
| #define | NRF_ANT_ERROR_INVALID_NETWORK_NUMBER NRF_ANT_ERROR_OFFSET + INVALID_NETWORK_NUMBER |
|
Response when an invalid network number is provided.
|
|
| #define | NRF_ANT_ERROR_INVALID_LIST_ID NRF_ANT_ERROR_OFFSET + INVALID_LIST_ID |
|
Response when the provided list ID or size exceeds the limit.
|
|
| #define | NRF_ANT_ERROR_INVALID_SCAN_TX_CHANNEL NRF_ANT_ERROR_OFFSET + INVALID_SCAN_TX_CHANNEL |
|
Response when attempting to transmit on channel 0 when in scan mode.
|
|
| #define | NRF_ANT_ERROR_INVALID_PARAMETER_PROVIDED NRF_ANT_ERROR_OFFSET + INVALID_PARAMETER_PROVIDED |
|
Response when an invalid parameter is specified in a configuration message.
|
|