Enumerations

The DCDC is disabled.

The DCDC is enabled.

Constant latency mode. See power management in the reference manual.

Low power mode. See power management in the reference manual.

1.7 Volts power failure threshold.

1.8 Volts power failure threshold.

1.9 Volts power failure threshold.

2.0 Volts power failure threshold.

2.1 Volts power failure threshold.

2.2 Volts power failure threshold.

2.3 Volts power failure threshold.

2.4 Volts power failure threshold.

2.5 Volts power failure threshold.

2.6 Volts power failure threshold.

2.7 Volts power failure threshold.

2.8 Volts power failure threshold.

This signal indicates the start of the radio timeslot.

This signal indicates the NRF_TIMER0 interrupt.

This signal indicates the NRF_RADIO interrupt.

This signal indicates extend action failed.

This signal indicates extend action succeeded.

The SoftDevice will guarantee that the high frequency clock source is the external crystal for the whole duration of the timeslot. This should be the preferred option for events that use the radio or require high timing accuracy.

Note

The SoftDevice will automatically turn on and off the external crystal, at the beginning and end of the timeslot, respectively. The crystal may also intentionally be left running after the timeslot, in cases where it is needed by the SoftDevice shortly after the end of the timeslot.

This configuration allows for earlier and tighter scheduling of timeslots. The RC oscillator may be the clock source in part or for the whole duration of the timeslot. The RC oscillator's accuracy must therefore be taken into consideration.

Note

If the application will use the radio peripheral in timeslots with this configuration, it must make sure that the crystal is running and stable before starting the radio.

The event does not have a notification.

The distance from the active notification to start of radio activity.

The distance from the active notification to start of radio activity.

The distance from the active notification to start of radio activity.

The distance from the active notification to start of radio activity.

The distance from the active notification to start of radio activity.

The distance from the active notification to start of radio activity.

The event does not have a radio notification signal.

Using interrupt for notification when the radio will be enabled.

Using interrupt for notification when the radio has been disabled.

Using interrupt for notification both when the radio will be enabled and disabled.

High (equal priority as the normal connection priority of the SoftDevice stack(s)).

Normal (equal priority as the priority of secondary activities of the SoftDevice stack(s)).

Request radio timeslot as early as possible. This should always be used for the first request in a session.

Normal radio timeslot request.

Return without action.

Request an extension of the current timeslot. Maximum execution time for this action: NRF_RADIO_MAX_EXTENSION_PROCESSING_TIME_US . This action must be started at least NRF_RADIO_MIN_EXTENSION_MARGIN_US before the end of the timeslot.

End the current radio timeslot.

Request a new radio timeslot and end the current timeslot.

Event indicating that the HFCLK has started.

Event indicating that a power failure warning has occurred.

Event indicating that the ongoing flash operation has completed successfully.

Event indicating that the ongoing flash operation has timed out with an error.

Event indicating that a radio timeslot was blocked.

Event indicating that a radio timeslot was canceled by SoftDevice.

Event indicating that a radio timeslot signal callback handler return was invalid.

Event indicating that a radio timeslot session is idle.

Event indicating that a radio timeslot session is closed.

Base value for SVCs that are available when the SoftDevice is disabled.

Base value for SVCs that are not available when the SoftDevice is disabled.