Address offset: 0x6B
GPIO polarity and pin select and configuration when GPIO control in use
| Bit number | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | |||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ID | D | C | B | B | A | ||||||||||||||||||||||||||||||
| Reset 0x00 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | |||||||||||||||||||||||||||
| ID | R/W | Field | Value ID | Value | Description | ||||||||||||||||||||||||||||||
| A |
RW |
POL |
Select polarity for the GPIO |
||||||||||||||||||||||||||||||||
|
ActiveLo |
0 |
Active low |
|||||||||||||||||||||||||||||||||
|
ActiveHi |
1 |
Active high |
|||||||||||||||||||||||||||||||||
| B |
RW |
PIN |
Select which GPIO controls LDO or Load switch |
||||||||||||||||||||||||||||||||
|
GPIO0 |
0 |
GPIO0 in use |
|||||||||||||||||||||||||||||||||
|
GPIO1 |
1 |
GPIO1 in use |
|||||||||||||||||||||||||||||||||
|
GPIO2 |
2 |
Reserved (GPIO2 in use) |
|||||||||||||||||||||||||||||||||
|
GPIO22 |
3 |
Reserved (GPIO2 in use) |
|||||||||||||||||||||||||||||||||
| C |
RW |
PINACT |
Mode selected, when GPIO active |
||||||||||||||||||||||||||||||||
|
ONHP |
0 |
ON, HP mode |
|||||||||||||||||||||||||||||||||
|
ONULP |
1 |
ON, ULP mode |
|||||||||||||||||||||||||||||||||
| D |
RW |
PININACT |
Mode selected, when GPIO inactive |
||||||||||||||||||||||||||||||||
|
OFF |
0 |
OFF |
|||||||||||||||||||||||||||||||||
|
ONULP |
1 |
ON, ULP mode |
|||||||||||||||||||||||||||||||||