Address offset: 0x29
GPIO usage for BOOST control
| Bit number | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | |||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ID | A | A | |||||||||||||||||||||||||||||||||
| Reset 0x00 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | |||||||||||||||||||||||||||
| ID | R/W | Field | Value ID | Value | Description | ||||||||||||||||||||||||||||||
| A |
RW |
FORCE |
Operating mode setting when GPIO is used to control BOOST. Active GPIO selects the mode from this register. When GPIO is inactive, operating mode is defined by register BOOST.OPER. |
||||||||||||||||||||||||||||||||
|
HP |
0 |
Active GPIO forces High Power (HP) mode |
|||||||||||||||||||||||||||||||||
|
LP |
1 |
Active GPIO forces Low Power (LP) mode |
|||||||||||||||||||||||||||||||||
|
PT |
2 |
Active GPIO forces Pass-through (PT) mode |
|||||||||||||||||||||||||||||||||
|
NOHP |
3 |
Active GPIO forces Prevent HP mode |
|||||||||||||||||||||||||||||||||