The following table lists the nRF Terminal commands available from the Command Palette. Some of these commands match buttons in the nRF Terminal profile toolbar and are only available when an nRF RTT Terminal or nRF Serial Terminal connection is active.
| Command | Description |
|---|---|
nRF Terminal: Start Terminal With New Configuration |
Starts an nRF RTT Terminal or nRF Serial Terminal connection, prompting for connection type and settings. |
nRF Terminal: Start Terminal With Previous Configuration |
Starts a terminal using the configuration from the last nRF Terminal connection (serial port or RTT). |
nRF Terminal: Switch to Line Mode |
Switches the terminal to the line mode, where input is sent line-by-line when you press Enter. |
nRF Terminal: Switch to Character Mode |
Switches the terminal to the character mode, where each keystroke is sent directly to the device. |
nRF Terminal: Turn On Local Echo |
Enables local echoing of typed characters when the device does not echo back input. Only applies in the character mode. |
nRF Terminal: Turn Off Local Echo |
Disables local echoing of typed characters. Only applies in the character mode. |
nRF Terminal: Save Terminal Content |
Saves the current terminal content to a file. |
nRF Terminal: Select Zephyr Log Dictionary |
Opens a quick pick to load a log_dictionary.json file for decoding dictionary-based log output in an active nRF RTT Terminal or nRF Serial Terminal connection. |