nRF54LS05A | nRF54LS05B Datasheet

nRF54LS05B Datasheet

Note: The HTML rendition of the Datasheet corresponds to the latest version only. All versions are available as PDF attachments.

nRF54LS05A and nRF54LS05B are part of the nRF54L Series. All wireless System-on-Chip (SoC) options in the series integrate an ultra-low power multiprotocol 2.4 GHz radio with MCU (Microcontroller Unit) functionality featuring a 128 MHz Arm® Cortex®-M33 processor. nRF54LS05A and nRF54LS05B support Bluetooth® LE and proprietary 2.4 GHz protocols.

Nordic Semiconductor's proprietary technologies, such as low-leakage RAM and advanced multiprotocol radio design, enable ultra-low power consumption, reducing battery size or increasing lifetime.

Designed with versatility in mind, the nRF54L Series SoCs are suited to enable a broad range of applications. The devices integrate the peripherals expected in a wireless microcontroller, enabling a variety of products to be implemented with a single chip.

nRF54LS05A and nRF54LS05B are available in a range of pin-to-pin compatible QFN package options, enabling cost-optimized and flexible design across different application requirements.

Key features
  • 128 MHz Arm Cortex-M33 processor
  • 508 KB NVM and 64/96 KB RAM
  • Multiprotocol 2.4 GHz radio supporting Bluetooth LE, and 2.4 GHz proprietary modes (up to 4 Mbps)
  • Three serial interfaces (SPI/TWI/UART)
  • Standard set of interfaces, peripherals, and timers including Global RTC available in System OFF, ADC, PWM and QDEC
  • Security: Baseline security configuration designed to support compliance with regulatory requirements for most Bluetooth LE products
  • QFN packages pin-to-pin compatible with selected SoCs
Radio
  • Bluetooth LE
    • LE 2M, LE 1M
  • 2.4 GHz proprietary GFSK
    • 4 Mbps, 2 Mbps, 1 Mbps
  • Single-ended antenna output (on-chip balun)
  • 128-bit AES/ECB/CCM/AAR coprocessor
  • Configurable TX power with 1 dBm step size from -10 dBm to maximum
Processor
  • 128 MHz Arm Cortex-M33 CPU
    • MPU
    • Debug – SWD, DWT
Memory
  • 508 KB NVM (RRAM)
  • 64/96 KB RAM
Peripherals
  • Three fully featured serial interfaces with EasyDMA, supporting I2C, SPI controller/peripheral, and UART
    • SPI up to 8 MHz (SPIM, SPIS)

    • TWI up to 400 kHz and I2C compatible (TWIM, TWIS)

    • UART up to 1 Mbps (UARTE)

  • SAADC with four channels
    • 14-bit at 31.25 ksps (oversampled)
    • 12-bit at 125 ksps (oversampled)
    • 10-bit at up to 1 Msps
  • Global RTC can run in System OFF mode and implement a shared system timer (GRTC)
  • One four-channel pulse width modulator (PWM) with autonomous waveform generation
  • One quadrature decoder (QDEC)
  • One watchdog timer (WDT)
  • Three 32-bit timers with counter mode (TIMER)
  • Temperature sensor (TEMP)
GPIO
  • Up to 37 GPIO pins
  • 8 MHz ports
Power supply and clock
  • Single-inductor DC/DC converter
  • Single 32 MHz crystal operation
  • Optional 32.768 kHz crystal
Security
  • Secure boot
  • Physical protection – Tamper detectors (TAMPC)
  • Hardware accelerated Bluetooth LE encryption
Key specifications
  • 4 dBm maximum TX power
  • -96 dBm RX sensitivity for 1 Mbps Bluetooth LE
  • 500 CoreMark®, 3.90 CoreMark/MHz EEMBC CoreMark® executing from non-volatile memory
  • 1.7 - 3.6 V supply and GPIO voltage
  • -40°C to +85°C operating temperature
Package options
  • QFN48 (QFAA) with 37 GPIO pins
    • 6x6 mm with 0.4 mm pitch